简历：

2024.10至今 北京科技大学 冶金生态与工程学院 特聘教授

2023.05–2024.09 苏州实验室 副研究员

2017.02–2023.04 中国工程物理研究院材料研究所 副研究员

2013.12–2017.04 北京科技大学新金属材料国家重点实验室 博士后

2012.09–2013.10 加拿大英属哥伦比亚大学材料工程系&乔克河实验室中子中心 博士后

2012.07–2013.11 哈尔滨工业大学 材料科学与工程学院 讲师

2006.09-2012.07 清华大学 材料科学与工程系 工学博士

2002.09–2006.07 北京科技大学 材料科学与工程系 工学学士

代表性论著（近3年） ：

[1] Z.W. Geng, J.L. Liu, D. Dan, X.L. Li, Z.L. Shu, J.Q. Zhang, C. Chen*, J.R. Luo*, M. Song, R.D. Li, K.C. Zhou, Achieving high ductility in Fe₄₅Mn₃₅Co₁₀Cr₁₀ metastable high entropy alloy by constructing chemical boundary with stacking fault energy heterogeneity, Materials Science and Engineering: A 913 (2024) 147019

[2] S.S. Wu, Z.D. Kou*, S. Tang, S. Lan, Q.Q, Lai, J.J. Wang, J.R. Luo*, X. F. Xie, R. Huang, G.Y. Zheng, W. Gerhard, T. Feng, Unveiling the correlation between anomalous hardening and grain boundary diffusional transformation in ω single-phase nano-grained Ti-Fe alloy, Journal of Materials Science and Technology 203 (2024) 099

[3] L. Deng, R.X. Li, J.R. Luo*, S.L. Li, X.F. Xie, S.S. Wu, W.R. Zhang, P.K. Liaw, E.A. Korznikova, Y. Zhang*, Plastic deformation and strengthening mechanism in CoNiV medium-entropy alloy fiber, International Journal of Plasticity 175 (2024) 103929

[4] Z.W. Geng, C. Chen*, M. Song*, J.R. Luo*, J.X. Chen, R.D. Li, K.C. Zhou, High strength Al_0.7CoCrFeNi_2.4 hypereutectic high entropy alloy fabricated by laser powder bed fusion via triple-nanoprecipitation, Journal of Materials Science and Technology 187 (2024) 141-155

[5] K. Xu, L. Zhang, C.Y. Bai, Jian Tu*, J.R. Luo*, Machine learning aided process design of Fe-Cr-Ni-Al/Ti multi-principal element alloys for excellent mechanical properties, Computational Materials Science 232 (2024) 112660.

[6] Z.W. Geng, Z.L. Shu, C. Chen*, J.R. Luo*, M. Song, R.D. Li, K.C. Zhou, Co-existence of nanoprecipitates with solute nitrogen evades the strength-ductility trade-off in metastable high entropy alloy, Materials Research Letters 12(6) (2024) 433-441

[7] 耿赵文, 李湘龙, 柏春燕, 罗晋如*, 宋淼, 陈超*, 周科朝, 间隙强化FeMnCoCr亚稳高熵合金及其低温/临氢服役性能研究进展, 中国有色金属学报 34 (2024) 422-442

[8] L. Deng, J.R. Luo*, J. Tu, R. Hu*, N. Guo, W.Y. Zeng, C.H. Wang, P. He, Y. Zhang*, Achieving excellent mechanical properties of ODS steel by Y₂O₃ addition, Materials Science and Engineering: A 872 (2023) 145008.

[9] K. Xu, J.H. An, L. Zhang, C.Y. Bai, J. Tu*, J.R. Luo*, Composition optimization of cobalt-free Fe-Cr-Ni-Al/Ti multi-principal element alloys for strength-ductility trade-off based on machine learning, Materials Today Communications 36 (2023) 106498.

[10] W.X. Li, B. Luo, H.T. Huang*, Y. Liu, W. Wang, J.R. Luo*, B.Q. Fu*, A comparative study of deuterium permeation behaviors of CoCrMnFeNi and AlCoCrFeNi high entropy alloys, International Journal of Hydrogen Energy 48 (2023) 19657-19665

[11] Y. Y. Wang, L.J. Chai*, F.L Zhang, L. Qi, J.R. Luo*, H. Wang, Y.Q. Li, X.G. An, Laser-clad Al-Ti-Zr and Cr-Ti-Zr coatings on Zr alloy: composition-induced microstructural and hardness differences. International Journal of Refractory Metals and Hard Materials 109 (2022) 105956

[12] Y.L. Gu, M.L. Yi, Y. Chen, J. Tu*, Z.M. Zhou, J.R. Luo*, Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites, Materials Characterization 193 (2022) 112300

[13] Z.W. Geng, C. Chen*, R.D. Li, J.R. Luo*, K.C. Zhou, Composition inhomogeneity reduces cracking susceptibility in additively manufactured AlCoCrFeNi_2.1 eutectic high-entropy alloy produced by laser powder bed fusion, Additive Manufacturing 56 (2022) 102941

[14] L. Deng, C.H. Wang, J.R. Luo*, J. Tu, N. Guo*, H.Y. Xu, P. He,S.Q. Xia, Z.W. Yao, Preparation and property optimization of FeCrAl-based ODS alloy by machine learning combined with wedge-shaped hot-rolling, Materials Characterization 188 (2022) 111894

[15] X. Hu, L.J. Chai*, J. Shen, H. Wu, Y.Q. Li, J. Cheng, J.R. Luo*, L. Yao*, Microstructure, Texture, and Hardness Evolution of Cold-Rolled High-Purity Ti Sheet During Annealing at 350°C to 550°C, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 (2022) 2086-8098

[16] J. Tu, K. Xu, Y. Liu, J.R. Luo*, Z.M. Zhou, L.P. Ding*, Characterization of deformation substructure evolution in metastable Fe₄₉Mn₃₀Co₁₀Cr₁₀B₁ interstitial high entropy alloy, Intermetallics 144 (2022) 107508

[17] C.H. Wang, Y. Liu, J.R. Luo*, S.K. Zheng, J. Tu, H.Y. Xu, H. Huang, J.M. Chen*, P.H. Wang*, Deformation substructure development in Al_XCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors, Journal of Alloys and Compounds 893 (2022) 162196

专利（近3年）：

[1] 一种梯度变形量样品弥散强化相的检测装置及方法. 2023.04.25，CN113433153B.

[2] 一种铈合金纳米晶层及其制备方法. 2023.04.07，CN115011893B.

[3] 一种大曲率微小件表面多层金属薄膜的无损检测方法. 2023.07.25，CN113640327B.

[4] 一种ODS钢磁性粉末中纳米相的表征方法. 2023.06.06，CN113834833B.

[5] 一种能有效减少焊接孔洞的激光焊接B-4C/Al的方法. 2022.10.18，CN113146042B.

[6] 一种耐蚀锆基非晶合金复合材料涂层的制备方法. 2022.09.02，CN113026013B.

[7] 不锈钢室温力学与腐蚀性能检测分析管理软件V1.0. 2022.05.18, 2023SR0143994.

[8] 高强韧耐蚀不锈钢机器学习成分优化软件V1.0. 2022.01.21, 2023SR0073016.

科研项目（近3年）：

[1] 科技部重点研发计划子课题：钛合金塑性变形组织演变过程的高通量表征研究，2024YFB3714200，2025-2027，133万；

[2] 科技部重点研发计划子课题：基于特殊界面调控的高锰钢氢致应力腐蚀机制研究，2023YFB3712700，2024-2027，137万；

[3] 苏州实验室科研项目课题：苏州实验室，多尺度组织与性能精准调控策略与机制，SJ-1102-2023-015-2，2024-2026，1868.00万；

[4] 国家自然基金面上项目：金属α钛中{11-24}孪生相关复杂孪晶协同细晶结构的构筑与增强增塑机理研究，52171052，2022-2025，58万；